Engine specs
| Manufacturer | Tahara Plant |
| Also called | Toyota 2JZ |
| Production | 1991-2007 |
| Cylinder block alloy | Cast-iron |
| Configuration | Straight-6 |
| Valvetrain | DOHC 4 valves per cylinder |
| Piston stroke, mm (inch) | 86 (3.39) |
| Cylinder bore, mm (inch) | 86 (3.39) |
| Compression ratio | 8.5 10.5 11.3 |
| Displacement | 2997 cc (182.9 cu in) |
| Power output | 162 kW (220 HP) at 5,600 rpm 162 kW (220 HP) at 5,800 rpm 164 kW (223 HP) at 5,800 rpm 169 kW (230 HP) at 6,000 rpm 206 kW (280 HP) at 5,600 rpm 239 kW (325 HP) at 5,600 rpm |
| Torque output | 294 Nm (216 lb·ft) at 3,600 rpm 280 Nm (206 lb·ft) at 4,800 rpm 280 Nm (206 lb·ft) at 4,800 rpm 304 Nm (224 lb·ft) at 4,000 rpm 435 Nm (321 lb·ft) at 4,000 rpm 440 Nm (324 lb·ft) at 4,800 rpm |
| Redline | 6,800 7,200 VVTi |
| HP per liter | 73.4 73.4 74.4 76.7 93.4 108.4 |
| Fuel type | Gasoline |
| Weight, kg (lbs) | 230 (507) |
| Fuel consumption, L/100 km (mpg) -City -Highway -Combined | for Supra Mk 4 18.0 (13) 10.0 (23) 12.5 (18) |
| Turbocharger | Naturally aspirated 2x Toyota CT20A 2x Toyota CT12B |
| Oil consumption , L/1000 km (qt. per miles) | up to 1.0 (1 qt. per 750 miles) |
| Recommended engine oil | 0W-30 5W-20 5W-30 10W-30 |
| Engine oil capacity, L (qt.) | 5.1 (5.4) – 2JZ-GE 1995-1998 Crown 5.4 (5.7) – 2JZ-GE 1998-2001 Crown 2WD 4.5 (4.75) – 2JZ-GE 1998-2001 Crown 4WD 3.9 (4.1) – 2JZ-GE 1991-1992 Crown, Crown Majesta 4.4 (4.6) – 2JZ-GE 1992-1993 Crown, Crown Majesta 5.3 (5.6) – 2JZ-GE 1993-1995 Crown, Crown Majesta 5.0 (5.3) – 2JZ-GTE Supra 5.2 (5.5) – 2JZ-GE Supra 5.4 – 2JZ-GE/FSE |
| Oil change interval, km (miles) | 5,000-10,000 (3,000-6,000) |
| Normal engine operating temperature, °C (F) | ~90 (195) |
| Engine lifespan, km (miles) -Official information -Real | – 400,000+ (250,000) |
| Tuning, HP -Max HP -No life span loss | 400+ <400 |
| The engine is installed in | Toyota Crown Toyota Mark II Toyota Supra Lexus IS300 / Toyota Altezza RS300 Lexus GS300 / Toyota Aristo Lexus SC 300/ Toyota Soarer Toyota Brevis Toyota Chaser Toyota Cresta Toyota Progres |
Toyota 2JZ-GTE (GE & FSE) engine reliability and problems
2JZ-GTE by Poudou99 / CC BY 4.0 / Compressed, cropped
In addition to the 1JZ, they produced the second, larger modification of the JZ called 2JZ. The engine replaced the past Toyota 7M. The 2JZ is a simple sort of a straight 6 cylinder motor with a hard cast iron cylinder block and 3 liter displacement. Comparing with the 1JZ, the block of cylinders became 14 mm higher. A crankshaft with a longer piston stroke (to 86 mm.) was mounted inside it. The motor is like the 1JZ. It has got two camshafts and 4 valves for each cylinder. The engine is equipped with an ACIS variable length intake manifold. Since 1997 the VVTi system was added. There are no hydraulic lifters on the motor. The valve clearance control is needed each 60,000 miles (100,000 km) of mileage. Firing order on the 2JZ is 1-5-3-6-2-4.
The 2JZ has a toothed timing belt. Its life span is 60,000 miles (100,000 km) of mileage.
The 2JZ (2JZ-GTE modification) is more known and famous, than the 1JZ motor and is similar to the Nissan RB26DETT engine. The quickest and craziest Toyota Supra engines (1500-2000 horsepower) were made of the 2JZs. These cars drove ¼ mile quicker than per 7 sec. The fans installed the 2JZ in other Toyotas, and also in Ford Mustang, Chevrolet Corvette, Camaro, different BMW, Mazda, and so on.
The 2JZ was produced from 1991 to 2007. The following modifications were produced: 2JZ-FSE, 2JZ-GE and 2JZ-GTE. Their specifications are given beneath.
Aug 10, 2021 Kodak Preps 8.4.0 Build 1824 If you do not create the SmarkMarks before the migration, any migrated static marks are automatically converted to SmartMarks when you open a migrated template or job in Preps 8. S-FRAME S-Line 2017.0.4 Ashlar Vellum Graphite 12 SP0 Build 12.0.12 Petroleum Experts IPM Suite v11.0 x64 Blue Marble Global Mapper v19.0.2 Win64 Command.Digital.AutoHook.2018.v1.0.4.00 Itasca Griddle v1.0.5 for Rhinoceros 6.x Materialise Magics RP v23.1 x64 Araxis Merge 2019.5254 x64 HAC Innovations eTank 2016 v1.2.60 DTCC SmartSolo. Kodak Preps 9.0.0 Build 512. February 17, 2021. One of the tools used in the printing industry, the PREPS imposition software produces faster and more accurate impositions that maximize the use of print sheets. With templates and libraries flexible and easy to use, the PREPS software facilitates the production of similar or repetitive work. The Subaru EJ251 and EJ252 engines had an aluminium alloy block with 99.5 mm bores – with cast iron dry-type cylinder liners – and a 79.0 mm stroke for a capacity of 2457 cc. The cylinder block for the EJ251 and EJ252 engines had an open-deck design whereby the cylinder walls were supported at the three and nine o'clock positions.
Toyota 2JZ engine modifications and differences
Feb 06, 2020 Kodak Preps 8.4.0 Build 182 Multilingual (Win/macOS) KODAK PREPS Imposition Software - the leading solution for error-free impositions and one of the most widely used tools in the printing industry. PREPS Imposition Software produces faster, more accurate impositions that maximize press sheet usage. Its automated imposition process cuts.
1. The 2JZ-FSE D4 modification (1999 – 2007) is a sort of the 2JZ engine with a direct injection system, which is similar to the 1JZ-FSE. It has got a compression ratio of 11.3, capacity of 220 horsepower at 5600 rpm. and its toque is 294 Nm (216 lb•ft) at 3600 rpm.
2. The 2JZ-GE type (1991 – 2005) is a kind of the 2JZ naturally aspirated engine. The first modification produced till 1997 had compression ratio of 10.5, 2JZ-GE stock injectors were 250 cc. Its capacity depended on settings and varied from 220 to 230 horsepower. When upgraded in 1997, the 2JZ was provided with a VVTi system, 3 ignition coils, another ECU broaching, etc. The capacity remained the same.
3. The 2JZ-GTE engine (1991 – 2004) is a sporting turbocharged 2JZ-GE modification. The motor was improved with CT20A turbochargers, intercooler, and the other pistons fitted to compression ratio of 8.5. The connecting rods were borrowed from the 2JZ-GE and the fuel injectors are 440 cc. The 2JZ-GTE camshaft specifications are as follows: duration 224/236 deg, lift 7.8/8.4 mm. Such engines developed a capacity of 280 horsepower at 5600 rpm. and had a torque of 435 Nm (320 lb•ft) at 4000 rpm.
The 2JZ-GTE modifications were designated for exporting. They were equipped with CT12B turbocharges, new camshafts (duration 233/236 deg, 8.25 /8.4 mm lift), and 550 cc fuel injectors. Due to those factors, the power of the exported 2JZ-GTE engine was increased to 330 horsepower at 5600 rpm. with a torque of 441 Nm (325 lb•ft) at 4800 rpm.
In 1997 the 2JZ was provided with a VVTi variable valve timing system. Its power remained the same, and its torque rose to 451 Nm (332 lb•ft) at 3600 rpm.
Toyota 2JZ engine problems and malfunctions
The 2JZ failures were similar to those of its younger brother, the 1JZ. Water can pour onto the spark plugs if washed. In such a case, your 2JZ won't start. Due to the presence of the VVTi and idle control valve sensor, there can be problem caused by rough idle and so on. It is HERE, where you can find out about all common problems.
The 2JZ is extremely safe and durable. If your motor has been properly maintained and only a high quality engine oil has been used, the 2JZ engine lifespan will comprise more than 300,000 miles (500,000 km) of mileage.
Toyota 2JZ engine tuning
Twin Turbo. Single Turbo
2JZ by chen chin from taipei~tokyo, taiwan~japan / CC BY 2.0 / Compressed, cropped
Everyone knows about the 2JZ's tuning. Although, some basic principles are worth mentioning.
It's no use upgrading the 2JZ-GE. You can certainly buy all the necessary performance cams, ITB, do head porting, mount an aftermarket intake system, headers and performance exhaust system.
When the engine has been built, it will develop not bad capacity, but the 2JZ-GTE equipped with a simple boost-up will be more powerfull and simpler.
You can buy a 2JZ-GE turbokit (Garrett GTX30) with a complete set of details and bolt the 2JZ-GTE pistons on or a thick 3 mm cylinder head gasket. You can also buy a 80 mm throttle body and adjust it on the Greddy E-Manage. As a result, you can get about 450 horsepower.
4 Divided By 0
2JZGTE Tuning guide
Jeep 4.0
In addition to the 1JZ, they produced the second, larger modification of the JZ called 2JZ. The engine replaced the past Toyota 7M. The 2JZ is a simple sort of a straight 6 cylinder motor with a hard cast iron cylinder block and 3 liter displacement. Comparing with the 1JZ, the block of cylinders became 14 mm higher. A crankshaft with a longer piston stroke (to 86 mm.) was mounted inside it. The motor is like the 1JZ. It has got two camshafts and 4 valves for each cylinder. The engine is equipped with an ACIS variable length intake manifold. Since 1997 the VVTi system was added. There are no hydraulic lifters on the motor. The valve clearance control is needed each 60,000 miles (100,000 km) of mileage. Firing order on the 2JZ is 1-5-3-6-2-4.
The 2JZ has a toothed timing belt. Its life span is 60,000 miles (100,000 km) of mileage.
The 2JZ (2JZ-GTE modification) is more known and famous, than the 1JZ motor and is similar to the Nissan RB26DETT engine. The quickest and craziest Toyota Supra engines (1500-2000 horsepower) were made of the 2JZs. These cars drove ¼ mile quicker than per 7 sec. The fans installed the 2JZ in other Toyotas, and also in Ford Mustang, Chevrolet Corvette, Camaro, different BMW, Mazda, and so on.
The 2JZ was produced from 1991 to 2007. The following modifications were produced: 2JZ-FSE, 2JZ-GE and 2JZ-GTE. Their specifications are given beneath.
Aug 10, 2021 Kodak Preps 8.4.0 Build 1824 If you do not create the SmarkMarks before the migration, any migrated static marks are automatically converted to SmartMarks when you open a migrated template or job in Preps 8. S-FRAME S-Line 2017.0.4 Ashlar Vellum Graphite 12 SP0 Build 12.0.12 Petroleum Experts IPM Suite v11.0 x64 Blue Marble Global Mapper v19.0.2 Win64 Command.Digital.AutoHook.2018.v1.0.4.00 Itasca Griddle v1.0.5 for Rhinoceros 6.x Materialise Magics RP v23.1 x64 Araxis Merge 2019.5254 x64 HAC Innovations eTank 2016 v1.2.60 DTCC SmartSolo. Kodak Preps 9.0.0 Build 512. February 17, 2021. One of the tools used in the printing industry, the PREPS imposition software produces faster and more accurate impositions that maximize the use of print sheets. With templates and libraries flexible and easy to use, the PREPS software facilitates the production of similar or repetitive work. The Subaru EJ251 and EJ252 engines had an aluminium alloy block with 99.5 mm bores – with cast iron dry-type cylinder liners – and a 79.0 mm stroke for a capacity of 2457 cc. The cylinder block for the EJ251 and EJ252 engines had an open-deck design whereby the cylinder walls were supported at the three and nine o'clock positions.
Toyota 2JZ engine modifications and differences
Feb 06, 2020 Kodak Preps 8.4.0 Build 182 Multilingual (Win/macOS) KODAK PREPS Imposition Software - the leading solution for error-free impositions and one of the most widely used tools in the printing industry. PREPS Imposition Software produces faster, more accurate impositions that maximize press sheet usage. Its automated imposition process cuts.
1. The 2JZ-FSE D4 modification (1999 – 2007) is a sort of the 2JZ engine with a direct injection system, which is similar to the 1JZ-FSE. It has got a compression ratio of 11.3, capacity of 220 horsepower at 5600 rpm. and its toque is 294 Nm (216 lb•ft) at 3600 rpm.
2. The 2JZ-GE type (1991 – 2005) is a kind of the 2JZ naturally aspirated engine. The first modification produced till 1997 had compression ratio of 10.5, 2JZ-GE stock injectors were 250 cc. Its capacity depended on settings and varied from 220 to 230 horsepower. When upgraded in 1997, the 2JZ was provided with a VVTi system, 3 ignition coils, another ECU broaching, etc. The capacity remained the same.
3. The 2JZ-GTE engine (1991 – 2004) is a sporting turbocharged 2JZ-GE modification. The motor was improved with CT20A turbochargers, intercooler, and the other pistons fitted to compression ratio of 8.5. The connecting rods were borrowed from the 2JZ-GE and the fuel injectors are 440 cc. The 2JZ-GTE camshaft specifications are as follows: duration 224/236 deg, lift 7.8/8.4 mm. Such engines developed a capacity of 280 horsepower at 5600 rpm. and had a torque of 435 Nm (320 lb•ft) at 4000 rpm.
The 2JZ-GTE modifications were designated for exporting. They were equipped with CT12B turbocharges, new camshafts (duration 233/236 deg, 8.25 /8.4 mm lift), and 550 cc fuel injectors. Due to those factors, the power of the exported 2JZ-GTE engine was increased to 330 horsepower at 5600 rpm. with a torque of 441 Nm (325 lb•ft) at 4800 rpm.
In 1997 the 2JZ was provided with a VVTi variable valve timing system. Its power remained the same, and its torque rose to 451 Nm (332 lb•ft) at 3600 rpm.
Toyota 2JZ engine problems and malfunctions
The 2JZ failures were similar to those of its younger brother, the 1JZ. Water can pour onto the spark plugs if washed. In such a case, your 2JZ won't start. Due to the presence of the VVTi and idle control valve sensor, there can be problem caused by rough idle and so on. It is HERE, where you can find out about all common problems.
The 2JZ is extremely safe and durable. If your motor has been properly maintained and only a high quality engine oil has been used, the 2JZ engine lifespan will comprise more than 300,000 miles (500,000 km) of mileage.
Toyota 2JZ engine tuning
Twin Turbo. Single Turbo
2JZ by chen chin from taipei~tokyo, taiwan~japan / CC BY 2.0 / Compressed, cropped
Everyone knows about the 2JZ's tuning. Although, some basic principles are worth mentioning.
It's no use upgrading the 2JZ-GE. You can certainly buy all the necessary performance cams, ITB, do head porting, mount an aftermarket intake system, headers and performance exhaust system.
When the engine has been built, it will develop not bad capacity, but the 2JZ-GTE equipped with a simple boost-up will be more powerfull and simpler.
You can buy a 2JZ-GE turbokit (Garrett GTX30) with a complete set of details and bolt the 2JZ-GTE pistons on or a thick 3 mm cylinder head gasket. You can also buy a 80 mm throttle body and adjust it on the Greddy E-Manage. As a result, you can get about 450 horsepower.
4 Divided By 0
2JZGTE Tuning guide
Jeep 4.0
Kodak Preps 8 4 0 Build 182 Chevy Silverado
The simplest and most reasonable thing is a purchase of a powerful 2JZ-GTE and swap.
The boost-up is to the first step to upgrading the engine. For doing that, you need to get a big intercooler, huge radiator, oil cooler, air filter, Toyota Supra US (280 lph) fuel pump, and fuel injectors. The stock can be remained or you can buy 550 cc stock fuel injectors. Also, you will need a performance exhaust system 3″, ECU Mines/Blitz (or something like that), and a boost-controller.
All the aftermarket parts allow increasing pressure in the stock turbochargers up to 17-19 psi (1.2-1.3 bar) in order to generate 450 horsepower.
If that doesn't suit you, you will have to buy a 2JZ-GTE turbokit (Garrett GTX3582R), 264 deg. camshafts, Walbro 400 lph fuel pump, 1000 cc fuel injectors, and ECU APEX'i Power FC. That will help generate up to 750 horsepower.
It is dangerous to exceed that limit while dealing with the 2JZ stock internals. Otherwise, you can face the music. For further increasing the engine's capacity, it would be better to acquire new forged pistons with reinforced Carrillo connecting rods, ARP head studs; you also had better improve the cylinder head and buy the camshafts (272 – 280 deg.), as well. In addition to that, you have to get more powerful turbokit and gain the engine's capacity to 1000 – 1500 horsepower or more.
